单词 > 单词

单词大全 查英文单词 英文单词解释

a constant temperature

美音: [ˈænθəm] 英音: [ˈænθəm]

a constant temperature单语例句

1. After special disinfection treatment, the flags are stored in a room with constanttemperature and humidity.

2. They also stored wine in their extensive cellars, which remain at aconstanttemperature and 80 percent humidity.

3. The egg is cooked at aconstanttemperature of 65 C, making it soft and silky.

4. They live in three pens held at aconstanttemperature, similar to their natural habitat.

5. The temperature of the hot spring in Huangshan Mountain is aconstant 42 degree.

6. The amenity from the constanttemperature massage shower nozzle which pours a large amount of water is enough to wipe away the tiredness of trip.

a constant temperature双语例句

1.

1. Because the occurrence of interface layers such as SiO_x and silicate at the atternative high k dielectric/Si is a major issure, which may lower the overall dielectric constant. In our experiments, an interface layer was observed enen for a very thin Er_2O_3 film at a very low temperature, which is supposed to attributed to the effect of the Er atom catalytic oxidation effect.
用同步辐射光电子能谱的方法对Er_2O_3薄膜在Si衬底上的初始生长情况作了研究,因为初始生长形成的界面在整个栅介质中起着举足轻重的作用(界面层的存在会降低栅介质总的介电常数)。

2.

2. It indicated that a-C: F films deposited at higher microwave power have a better thermal stability. And the films deposited at R. T were mainly composed by CF2 and CF as well as C=C bonding. F is desorbed with C with the form of CFx at lower annealing temperatureand the transformation of the band state of C atom from SP* to SP2 occurs at higher annealing temperature which enhances the C=C bonding of a-C:F film. Thefilms take on amorphous structure even after 400C annealing. There is a close relationship between relative concentration of C=C bond and optical band gap and a lower optical band gap corresponds to a better thermal stability. Both dielectric constantand dielectric loss increased after annealing due to the loss of F and enhanced orientation polarization, respectively.
结果表明,高微波功率下制备的a-C:F膜具有较好的热稳定性;室温下沉积的薄膜主要由CF_2和CF键和C=C键构成,当退火温度较低时,C与F成分主要以CFx的形式从膜中逸出,当退火温度继续升高后,部分SP~3C转变成Sp~2C,使膜中C=C键含量增加;a-C;F薄膜经历了400℃热处理后仍为非晶结构;薄膜C=C键含量与光学带隙之间存在密切的关联,低的光学带隙对应较好的热稳定性;退火山氟的逸出导致了介电常数增大,薄膜取向极化的增加使得介电损耗增大。

3. One group of slabs (B1, B3 and B5) was loaded under high temperature after heating to aconstanttemperature. Another group (B2, B4 and B6) was loaded after heating to temperature, holding them at constanttemperature and then naturally cooling to ambient.
第1组板(板Bl,B3,BS)经历相应时间的升温及恒温阶段后,进行高温下加载;第2组板(板B2,B4,B6)经历相应时间的升温、恒温及冷却阶段后,进行高温后加载。

4. A sensor chip has a piezo-resistive bridge, atemperature resistive bridge, and a multifunctional resistor network that can be used to provide span compensation when operating the piezo-resistive bridge in aconstant current mode.
一种传感器芯片含有压敏电阻电桥、温度电阻电桥和多功能电阻网络,该多功能电阻网络可以用于压敏电阻电桥工作在恒电流模式时的量程补偿。

5.

5. Use of safe and reliable heat conduction oil heating system to ensure aconstanttemperature of the process of follow-up together, follow-up combined pressure of the pneumatic system by a reliable and guaranteed.
采用安全可靠的导热油加热系统,保证覆合过程的温度恒定,覆合压力由可靠的气压系统提供及保证。

6.

6. Using ancient techniques, aconstanttemperature and humidity can be achieved in the caves all year round, ensuring perfect development of every cheese Emmi produces.
在干酪酱里面是不可缺少的。非常美丽。埃蒙塔尔奶酪既可以切成薄片单独食用,也可以和蔬菜搭配在一起拌成沙拉。

7. Because there is no constant boiling point and boiling temperature between DMAC and Water has a very large gap, the target of separation can be obtained by the means of rectification. We adopt the way of area, which was suggested by Herrington, to verify thermodynamics coherence.
利用双循环气液平衡釜测定DMAC—水气液相平衡数据,可知该溶液无论文摘要恒沸现象,且两纠分沸点相井较大,采用精馏法可以达到分离的目的。

8.

8. It is confirmed from fluorescence data that the quenching effect of FBS on the BSA fluorescence is a single static quenching process. The fluorescence quenching data was analyzed using the Stern-Volmer equation and double-logarithm equation. The binding constantand binding sites were 1.04×10 and 1.09 at ambient temperature (26), respectively. It is revealed from the above results that the bonding of FBS with BSA leads to a significant change of the secondary structure of BSA.
按照Stem-Volmer方程和双对数方程分析处理实验数据,得到了不同温度下FBS与BSA反应的结合常数和结合位点数,常温(26℃)下,分别为1.04×10^5和1.09;实验结果还表明,FBS与BSA之间的相互作用影响了BSA的二级结构,使其构象发生变化。

9. After many years of efforts and constant innovation, attention to the introduction of advanced engineering and technical personnel, pay attention to digest foreign brand-name products of similar experience, have developed the electric heating, gas burning heating and diesel combustion heating, wood burning heating and other forms of heat-hanging empty tunnel furnace, Automatic transmission chain hanging furnace, with automatic transmission network tunnel furnace, vertical oven, high-temperature heat treatment furnace, hot-melt wax (for a number of tanks at the same time heating), spray paint lines, and various industrial baking Heating equipment.
经过多年的努力,不断创新,重视引进高级工程技术人员,注意消化国外名牌同类产品经验,相继研发出电加热、瓦斯燃烧加热、柴油燃烧加热、木柴燃烧加热等热源方式的吊空式隧道炉、全自动吊链输送炉、全自动网带输送隧道炉、立式烤箱、高温热处理炉、热熔煲、喷涂烤漆线等各种工业烘烤加热设备。

10. At present, the usual method of screen is electric aging in which all devices are aged with aconstant power or aconstant current under high temperature and then the early failed devices are selected.
因此,如何正确、方便的检测半导体激光器的性能、质量并对其可靠性进行评价具有重要的意义。

11. We have constanttemperature experimental apparatus, ultrasonic cleaning machines, high-precision Abbe Refractometer calibration using modern high-precision equipment and testing instruments, has a number of professional and technical high, the practice of high-tech experienced team to forge a solid foundation for enterprise development.
本厂拥有恒温实验装置,超声波清洗机,高精度校准用阿贝折光仪等现代化高精设备和检测仪器,有一批专业技术高,实践经验丰富的高科技人员队伍,铸就企业发展的雄厚基础。

12.

12. The variable connectivity index is used in the modeling of the physical properties of polymers. A new model is proposed for the heat capacity at constant pressure of solid and liquid polymers at room temperature, which is simple and has good accuracy as well as predictive capability.
率先把可变连接性指数应用于聚合物物理性质的模型化研究中,并对聚合物热容数据建立了比以前模型结构简单且精度更高、预测性更好的新模型,促进了种新型指数的广泛应用。

13.

13. Using a single pulse solar cell tester with constant light intensity for 5ms, we have studied the performance of conventional crystalline silicon solar cell with low concentrator(1~10 sun)and cells temperature of 15~110℃at laboratory.
结果表明,室温下常规太阳电池的最佳工作点电压V_m和光功率放大系数a随入射光强增加呈现先增后降的趋势,并且串联电阻小的电池下降速度慢,串联电阻大的电池下降速度快;温度对晶体硅太阳电池的工作电压和输出功率相当敏感;在严格控制太阳电池工作温度的条件下,串联电阻小的电池在较宽的聚光范围内可以获得良好的使用效果。

14.

14. Dongguan Jian Qiao Equipment Co., Ltd was established for many years, located in Guangdong Province Tangxia Tangxia Town, Dongguan City Industrial Zone on the 30th the first company has been engaged in the electronic testing equipment, environmental test equipment sales services and the development of automatic test system, the main product has: testing machine, furniture testing machine, swing machine, optical quality control testing instruments, wire tester, wear-resistant machine, constanttemperatureand humidity machine, optical image measuring instrument, wire testing machine, office chair repeated impact test machine, a desk drawer repeated testing machine, office chair backrest repeated testing machine, office chairs rotary life testing machine, officelife test machine, plug line hoist swing test, MIT-style folding strength testing machine, tensile testing machine, micro-computers, paper tube compression testing machine, aging test machine, testing machine decolorization extent, resistant to rubbing tester, testing machine embrittlement, sudden pull test machine, testing machine, such as bonding strength.
东莞市剑乔仪器设备有限公司创建多年,位于广东省东莞市塘厦镇塘厦第一工业区30号公司一直从事电子测试仪器、环境试验设备的销售服务和自动测试系统的开发,主要产品有:试验机,家具试验机,摇摆试验机,光学品管检测仪器,线材测试仪,耐磨机,恒温恒湿机,光学影像测量仪,线材试验机,办公椅反复冲击试验机,办公桌抽屉反复试验机,办公椅反复靠背试验机,,办公椅旋转寿命试验机,办公椅脚寿命试验机,插头线吊重摆动试验,MIT式耐折强度试验机,微电脑拉力试验机,纸管抗压试验机,老化试验机,脱色程度试验机,耐揉试验机,脆化试验机,突拉试验机,胶合强度试验机等。

15. It was found that the activation energy deduced from the modified Arrhenius equation is aconstant independent of temperature.
由修正后的Arrhenius公式计算得到的电导活化能是一个与温度无关的常数。

16. Results on the evolution of deformation resistance measure by different techniques, like constant strain rate, creep, or stress relaxation, are collected into a convenient and largely material-independent frame of temperature-normalized strain rate against shear modulus-normalized stress.
通过采用不同手段如恒应变速率,蠕变或应力松弛来测量变形抗力的演化,这些结果收集起来放入一个便利的且很大程度上与材料无关的框架中,温度-标准应变速率相对于剪切模量-标准应力。

17. A microwave resonant cavity based method for wet air humidity measurement is presented in this paper. The calculation model of equivalent dielectric constant of wet air at different temperature and humidity is established. A specially structured resonant cavity with annular grid at its both ends was designed for the humidity measurement of flowing wet air.
提出一种通过微波谐振腔测量气体介电常数实现空气湿度连续测量的方法,并给出计算不同温度和湿度下空气等效介电常数的模型,设计出作为流动空气湿度传感器的两端采用开放同心圆环结构的特殊结构的谐振腔,对制作的谐振腔进行了气动特性仿真及S参数测量。

18. The rate of deformation of a sample to stress at aconstanttemperature is known as the creep rate.
试样在恒温下的变形与应力之比就是蠕变速率。

19. M at 160K excited at 576nm has three radiative deactivations: One is the strong and fast fluorescence decay with a time constant of 18ps at resonant emission of the J-band (580nm), and its decay time is not almost changed with the temperature; The other two are also fluorescence decay with lifetime of 24ps at 630nm and 60ps at 670nm, respectively.
但变化程度比之于单分子体的而言也是较小的,这两个荧光退激过程说明分子形成了J型聚集态对其基电子态也有影响。

20. In the extrusion of a certain amount of cases, where extpuded main motor speed constant linear velocity of the compound, the faster the composite layers of thin, hot-melt temperature will drop coated to reduce calories on oilysludge, a drill-molten resin heyly, thus causing a decline in Peel strength.
在挤出量一定的情况下,即挤出主电机转速不变的情况下,复合线速度越快,则复合层越薄,热熔膜温度将会下降,涂布基材上的热量减少,熔融树脂的钻合力降低,从而也就造成剥离强度的下降。

别人正在搜